신고사유
신고해주신 내용은 쇼핑몰 운영자의 검토 후 내부 운영 정책에 의해 처리가 진행됩니다.
상품명 | Q150V Plus for ultra-fine coatings in high vacuum applications |
---|---|
판매가 | 견적문의 |
월 렌탈 금액 |
월 원 (개월 기준)
|
---|
구매방법 | |
---|---|
배송주기 |
정기배송 할인 save
|
옵션선택 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드상품명 | 상품수 | 가격 |
---|---|---|
Q150V Plus for ultra-fine coatings in high vacuum applications | 수량증가 수량감소 | 견적문의 ( ) |
|
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
The Q150V Plus is optimised for high-vacuum applications, with an ultimate vacuum of 1×10-6mbar. Together with the use of a wide-range Penning/Pirani gauge, this enables the sputtering of oxidising metals with ultra-fine grain sizes, which are suitable for high resolution imaging. The lower background pressure removes oxygen nitrogen and water vapour from the chamber, avoiding chemical reactions during the sputter process, which could otherwise lead to impurities or defects in the coatings. Similarly, lower scattering allows for high purity, amorphous carbon films of high density.
The Q150V Plus offers all the benefits of the Q150T Plus, but with a finer grain size and thinner coating, for ultra-high-resolution applications (above x 200,000 magnification).
These products are for Research Use Only.
Allows multiple users to input and store coating recipes, with a new feature to sort recipes per user according to recent use.
Intelligent system logic automatically detects which insert is in place and displays the appropriate operating settings and controls for that process.
System prompts user to confirm target material and it then automatically selects appropriate parameters for that material.
Intuitive software allows the most inexperienced or occasional operator to rapidly enter and store their own process data. For convenience a number of typical sputtering and carbon coating recipes are already stored but also allows the user to create their own. Software detects failure to achieve vacuum in a set period of time and shuts down the process in case of vacuum leak, which ensures pump protection from overheating.
Careful evaporation allows precise control of carbon thickness (with or without the optional film thickness monitor). The quality of the resulting carbon films is also enhanced by the eradication of “sparking” that is a common feature of less advanced coaters.
For reproducible high-quality carbon films, we would recommend the use of shaped carbon rods. Rods are higher purity, less susceptible to debris and easier to control. Pulsed and ramped carbon rod recipes are supplied as standard.
Sputter coating is a technique widely used in various applications; it is possible to create a plasma and sputter metals with high voltage, poor vacuum and no automation. However, this is not suitable for electron microscopy applications because it will heat the sample and can result in damage when the plasma interacts with the sample. The Q150V Plus series uses low temperature enhanced-plasma magnetrons optimised for the turbomolecular pump pressures, combined with low current and deposition control, which ensures your sample is protected and uniformly coated.
The Q150V S Plus and Q150V ES Plus use easy-change, 57 mm diameter, disc-style targets which are designed to sputter oxidising and noble metals. The Q150V S Plus and Q150V ES Plus are fitted as standard with a chromium (Cr) sputter target. Other targets options include: Au, Au/Pd, Pt/Pd, Pd, Pt, Cu, Ir, W, ITO and Al. Others are available on request.
Aluminium (Al) rapidly forms an oxide layer, which can be difficult to remove, but the ES & S Plus have special recipes for aluminium that reduce the oxide removal time and prevent excessive pre-sputtering of the target.
This allows the user to configure the system as a sputter coater, evaporator or glow discharge system – all in one space saving format. A carbon cord evaporation insert is available as an option. Automatic detection of the head type when changed.
Removable glass chamber and easily accessible base and top plate allows for an easy cleaning process.
Users can rapidly change the chamber, if necessary, to avoid cross contamination of sensitive samples.
Tall chamber option is available for carbon evaporation to avoid sample heating, to improve uniformity for sputtering and to hold taller samples.
The Q150V Plus has specimen stages to meet most requirements. All are easy-change, drop-in style (no screws) and are height adjustable (except for the rotary planetary stage).
Some examples:
Other options are available on request.
게시물이 없습니다
게시물이 없습니다